現代控製工程（第5版）（英文版） pdf epub mobi txt 电子书 下载 2025

☆☆☆☆☆

[美] Katsuhiko Ogata 著

圖書標籤:

• 控製工程
• 現代控製
• 自動控製
• 係統分析
• 係統設計
• 綫性係統
• 狀態空間
• 最優控製
• 魯棒控製
• 英文教材

出版社： 电子工业出版社

ISBN：9787121122033

版次：5

商品编码：10374011

包装：平装

丛书名： 国外计算机科学教材系列

开本：16开

出版时间：2011-01-01

用纸：胶版纸

页数：894

內容簡介

《現代控製工程（第5版）（英文版）》為自動控製係統的經典教材，詳細介紹瞭連續控製係統（包括電氣係統、機械係統、流體動力係統和熱力係統）的數學模型建模方法，動態係統的瞬態和穩態分析方法，根軌跡分析和設計方法，頻率域的分析和設計方法，以及PID控製器和變形PID控製器的設計方法；同時還比較詳細地介紹瞭現代控製理論中的核心內容，狀態空間分析和設計方法。最後還簡要地介紹瞭20世紀80~90年代發展起來的稱為“後現代控製理論”的魯棒控製係統。全書自始至終，貫串瞭用MATLAB工具分析和設計各類控製係統問題。

目錄

Chapter 1 Introduction to Control Systems
1.1 IntrOduction
1.2 Examples of Control Systems
1.3 Closed.Loop Control Versus Open.Loop Contr01
1.4 Design and Compensation of Control Systems
1.5 Outline of the Book
Chapter 2 Mathematical Modeling of Control Systems
2.1 Introduction
2.2 Transfer Function and Impulse.Response Function
2.3 Automatic Control Systems
2.4 Modeling in State Space
2.5 State.Space Representation of Scalar Differential Equation Systems
2.6 Transformation of Mathematical Models with MATLAB
2.7 Linearization of Nonlinear Mathematical Models
Example Problems and Solutions
Problems
Chapter 3 Mathematical Modeling of Mechanical Systems and Electrical Systems
3.1 Introduction
3.2 Mathematical Modeling of Mechanical Systems
3.3 Mathematical Modeling of Electrical Systems
Example Problems and Solutions
Problems.
Chapter 4 Mathematical Modeling of Fluid Systems and Thermal Systems
4.1 Introduction
4.2 Liquid.Level Systems
4.3 Pneumatic Systems
4.4 Hydraulic Systems
4.5 Thermal Systems
……
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10

精彩書摘

Because this theory requires mathematical background at the graduate level。inclu-sion of robust control theory in this book is limited to introductory aspects only．Thereader interested in details of robust control theory should take a graduate·level controlcourse at an established college or university． Definitions．Before we can discuss control systems，some basic terminologies mustbe defined． Controlled Variablend Control Signal or Manipulated Variabl~The controlledvariable is the quantity or condition that is measured and controlled．The control signalor manipMated variable is the quantity or condition that is varied by the controller soas to affect the value of the controlled variable．Normally,the controlled variable is theoutput of the system．Control means measuring the value of the controlled variable ofthe system and applying the control signal to the system to correct or limit deviation ofthe measured value from a desired value． In studying control engineering，we need to define additional terms that are neces'sary to describe control systems． Plants．A plant may be a piece of equipment，perhaps just a set of machine partsfunctioning together，the purpose of which is to perform a particular operation．In thisbook，we shall call any physical object to be controlled(such as a mechanical device，aheating furnace，a chemical reactor，or a spacecraft)a plant． Processes．The Merriam二webster Dictionary defines a process to be a natural，pro-gressively continuing operation or development marked by a series of gradual changesthat succeed one another in a relatively fixed way and lead toward a particular result orend；or an artificial or voluntary,progressively continuing operation that consists of a se。ries of controlled actions or movements systematically directed toward a particular re-sult or end．In this book we shall call any operation to be controlled a process．Examplesare chemical，economic，and biological processes． Svstems． A system is a combination of components that act together and performa certain objective．A system need not be physical．The concept of the system can be applied to abstract．dynamic phenomena such as those encountered in economics．Theword system should，therefore，be interpreted to imply physical，biological，economic，andthe like，systems． Disturbances． A disturbance is a signal that tends to adversely affect the valueof the output of a system．If a disturbance is generated within the system，it is calledinternal,while an external disturbance is generated outside the system and is an input． Feedback Control Feedback control refers to an operation that．in the presence of disturbances，tends to reduce the difference between the output of a system and some reference input and does so on the basis of this difference．Here only unpredictable dis-turbances are so specified，since predictable or known disturbances can always be com-pensated for within the system．
……

前言/序言

评分☆☆☆☆☆

比国内的 好多了 大学 学的是 航天版的 没这个好

评分☆☆☆☆☆

适合本科或研究生阅读，内容比较全。

评分☆☆☆☆☆

2、内容还是那么经典，可以边matlab边学习。

评分☆☆☆☆☆

买了三本。其中一本书页有点黄，像是旧书。大体质量还好。

评分☆☆☆☆☆

较常用的教程，不错，挺好。

评分☆☆☆☆☆

1、第4版有中文，但是这个英文版国外卖很贵的。

评分☆☆☆☆☆

导师推荐的书，内容比较全面，自控和线控的集合吧，学习中

评分☆☆☆☆☆

适合本科或研究生阅读，内容比较全。

评分☆☆☆☆☆

很经典的教材，非常适合学生和工程师使用，京东的物流也非常快。